Window Tinting FAQ's

Window Tinting Laws in Queensland (QLD), Australia

Front Side Windows (driver & passenger)

• Must have at least 35% VLT (visible light transmission).

• This is the standard legal minimum for front windows.

Rear Side Windows & Rear Windscreen

• Can be darker — legal down to 20% VLT.

• Anything darker than 20% is not allowed unless factory-fitted and compliant.

Windscreen (front)

• Tint is only allowed on the top 10% of the windscreen or above the top of the wiper sweep — whichever is smaller.

• The main windscreen must remain highly clear (no full-screen tint films allowed).

Reflective / Mirror Tints

• Mirror-finish or highly reflective films are not allowed.

• Tint cannot reflect more than 10% of light.

Condition of Tint

• Tint must not have:
  

  • Excessive bubbling

  • Peeling

  • Scratches

  • Any defect that impairs visibility

• If factory-tinted glass already exists, the combined VLT after applying film must still meet the legal minimums.

Penalties

• Illegal tint can result in a fine.

• Vehicles may also receive an inspection notice or defect notice.

• Continued non-compliance can lead to harsher penalties.

Why These Rules Exist

• Ensures drivers can see clearly, especially at night.

• Helps police and emergency services see inside the vehicle.

• Reduces glare and safety hazards caused by reflective films.

After your tint is installed, avoid winding down the windows for 48–72 hours while the film cures. It’s normal to see light haze or small bubbles during the first 2–4 weeks. Avoid cleaning the inside glass for one week, and when you do, use only ammonia-free cleaner and a soft microfiber cloth. Keep sharp objects, seatbelt buckles, suction cups, and pets away from the windows to prevent scratches. Once cured, clean gently and avoid abrasive products or harsh chemicals. If you notice any issues after the curing period, contact us under your warranty.

Yes — for most drivers, especially in Queensland’s heat, ceramic tint is absolutely worth the extra investment.

Why it’s worth it:

• Superior heat rejection: Ceramic tint blocks significantly more infrared heat than standard films, keeping your car noticeably cooler.

• Excellent UV protection: It typically blocks up to 99% of harmful UV rays, helping protect your interior from fading and your skin from sun exposure.

• No signal interference: Because ceramic tint is non-metallic, it won’t affect GPS, mobile phone reception, radio, or keyless entry systems.

• Better clarity: Ceramic film provides a higher-quality, distortion-free view compared to cheaper tints.

• Long-lasting: It’s more resistant to fading, bubbling, and discolouration, making it a strong long-term option — ideal if you plan to keep your vehicle for years.

• Great for QLD climate: In hot and sunny conditions, the difference in comfort is very noticeable.

Yes, you can absolutely tint over privacy glass. Factory privacy glass is dyed glass, not a heat-rejecting film, so it only provides darkness and basic UV protection. Adding a high-quality window film (especially ceramic tint) gives you the benefits privacy glass doesn’t provide — such as heat reduction, improved UV blocking, and better glare control.

The only thing to keep in mind is legal limits: the combined darkness of the privacy glass and the film must still meet Queensland’s minimum VLT requirements. We’ll measure your glass first and recommend a shade that stays fully legal.